KeeKit Indoor Outdoor Thermometer, Digital Hygrometer Meter Gauge with 3 Wireless Sensors, Temperature Humidity Monitor with LCD Backlight, Min/Max Record for Home, Office, Restaurants, Bars, Cafe

The media could not be loaded. I have had one of these now for about 3 years and I really liked it so I wanted to make a video of it just in case you guys were in the market for a good digital thermometer. This set includes 3 sensors plus the base for a total of 4 zones. It not only provides temperature in either Celsius or Farenheit, but it also shows humidity levels in all zones. With a 100 meter range it really works well for me as I use it to monitor my refrigerator, freezer plus indoor and outdoor temps and humidity levels.

I have owned this almost 4 months now, and it is really great.My previous outdoor unit kept getting hijacked by my neighbors temp sensor from Lowe's, so I decided to try this, to get a different freq.I have not recharged the remote sensors yet! Amazing battery life I think for such small rechargeable units.I have mine setup as 1 outdoor sensor, 1 freezer and 1 refrigerator sensor.It is not lightning fast on refresh rates, but plenty fast enough. That way you get a much more realistic value of the temps.It was also super easy to pair the remotes with the base station display.

tl;dr: Sensors 2 & 3 were 2º (F) higher than sensor 1 and the base.Not perfect but I'm happy enough. I'm mostly interested in temp diffs between areas; this works for me.- - Full story:After a couple of days of use I suspected some readings might be off. I placed all 4 components on my nightstand. I waited a few hours to adjust to room temperature and I saw that the base station and sensor 1 agreed on the room temp. Sensors 2 & 3 also agreed with each other - but not with sensor 1 and base. Over 4 days, this disparity didn't change. Two & 3 read high.I'm pretty sure sensor 1 & base are close to accurate. Sensor 1 agrees with my SkyScan indoor/outdoor temps. I placed sensor 3 outside and those readings seem to be a couple of degrees higher than they should be.

All 3 sensors worked in the garage. This contrasts with another brand I purchased, RoaProbe, where none of the 3 sensors would work in the garage or even shorter distances. I have just completed testing the sensors in several identical places to check on consistency of temperature and humidity readings. Sensors 2 and 3 are almost identical in several circumstances and sensor 1 is somewhat different on humidity reading (about 4%). Compared to other thermometers these temperature readings match and therefore I assume are accurate. The base unit is small which is a plus for me. I am very pleased with the sensors.Note: Make sure you hold down the 'Channel' button after installing the batteries to sync sensors.

Tried all 3 out in same room near each other and all readings were within 1 degree (temp) or 2% (humidity) of each other.

After several expensive outdoor weather stations got destroyed by insect infestations, I wanted something inexpensive enough to be expendable after a year or so if necessary. I also wanted several outdoor temperatures at locations where we actually go rather than where meteorologists like to put sensors. This unit fit both requirements. As one who handled weather instrumentation professionally before I retired, I was not expecting three affordable remotes and a console to have thermometers accurate to within a few tents of a degree F. This system does. I inter-compared the sensors with each other, with an independent digital thermometer, and with nighttime local readings on several weather networks. The sensors are self consistent to +/- 0.1F and consistent with the other sensor to 0.2F and the network to better than 0.5F. The system is utterly simple to install and initialize. We are thoroughly enjoying it.

My last station had an accident it failed to survive so I went looking for one. This one arrived the next day and I had no problems getting the remote to be recognized by the base station (my instructions appear to be updated to say that the batteries in the remotes must be installed before installing batteries in the base station). Synching the units wasn't immediate but within 30 seconds the first unit was found by the base station and the other two shortly followed. The 3 remotes was nice, one is outside on our deck, one is in the garage and the other is downstairs.All the remotes when they were on the kitchen table read within 1/2 deg F of each other. It does take a while for any remote to respond to a significant change like putting it outside. I assume there is enough thermal mass that it takes a while for the temperature sensing unit to see the new conditions.

I bought a two sensor version of the product to use in the refrigerator of my travel trailer to know if it was cooling correctly while rolling, and it worked great for that. I placed the other sensor in the cabin area of the RV, so I could see how hot it was getting in there as well. It worked really well, the max/min functions were helpful and I could reset them easily.So, I decided to buy another for use in my house. I bought the three sensor version thinking I’d have one for the refrigerator, one for the freezer, and one for ambient. The three sensor version does not have a reset button for min/max but the instructions says it is a 24 hour min/max function. Also, the units do not easily stay paired exclusively, so I had to take the batteries out of the sensors in my RV, or I would sometimes get a reading that my freezer had gone up to 55°F , when that was actually the temperature in the cabin of the RV.If I was buying another one, I think I like the functionality of the two-sensor version better.

Seems to be doing what it should. I had all the sensors on a table with the main display unit and their readings were all very close. Not all of them were exactly in-sync, but just off by small fractions really. Now I have them all set up within about 20 to 35 feet of the main unit, with various doors and floors in between (i.e mainfloor to basement) and the main display seems to pick up on all of the sensors just fine. The display unit itself is a bit smaller than I would have thought. I guess that makes it more compact and take less space. Seems to be good enough. It was surprising how small the box that it all came it, was. But everything was there. Simple to set-up. Visibility and viewing angles are good, and I like that it has a light, but I've not needed to use the light much at all. I have one sensor in a freezer and had one outdoors during a heatwave, and both seem to work well. Pleased with it so far and I hope it stays that way!

Funciona bien, bastante preciso, permite conocer datos de los diversos lugares de una casa con huerto o invernaderos. Muy buena compra.

Compre el producto y las primeras semanas todo funcionó bien, al mes y medio el equipo dejo de detectar dos de los sensores. Ahora sólo detecta uno.

Me agrado

Répond à mes attentes